I remember early on, President Trump, Governor Cuomo, the Centers for Disease Control and Prevention, the World Health Organization, the U.S. Surgeon General Jerome M. Adams, Doctor Fauci, Deborah Birx, and many others, said that masks won’t help. They are only to protect front-line workers such as doctors, nurses, and other healthcare workers. Bullshit.
I knew that wasn’t true, to me, it’s common-sense. I believe they were saying that simply because of the shortage on N95 masks and had they told people to wear masks, it would have created a panic, because you just could not get your hands on them.
Personally, I wore a mask since day one. Like everyone else, I could not find anything, but I came across a company called Training Mask, and I picked up their VENT Filtration Breathing Trainer, with as many filters as they would let me purchase, and started wearing it right away. I’ll post about this company separately.
As the weeks passed, the FDA approved KN95 face masks, they started to become available, and the above-mentioned shifted to wearing “face coverings”.
As of the 17th of April, Governor Cuomo made coverings mandatory within New York State for everyone, assuming you could not comply with social-distancing. Finally, it’s about time.
In late March prior to receiving my Training Mask, I happened to have a two pack of 3M™ N95 Particulate Respirator in my toolbox. I remember going out to shop the last two weeks of March, no one wore a mask, and I’d get a lot of looks. Very early April I received my Training Mask, I’d go shopping with it, and still, no one was wearing masks, and I’d get even more looks.
Little-by-little, more and more people started to wear masks, even before Cuomo made it mandatory. From my experience, I’d say about 10% of people were wearing masks and/or face coverings on the 4th and 5th of April, about 40% on the 11th and 12th of April, about 65% on the 18th and 19th of April, and finally last weekend on the 18th and 19th of April, which is following Cuomo’s mandate, 99% of people were wearing them.
I went to BJ’s Wholesale Club, which was not enforcing it, Target, which was enforcing it, and had security at the entrance, and Stew Leonard’s in Farmingdale, which I do not think were enforcing it. I don’t remember anything at the entrance, but, I do remember seeing shoppers without anything.
With that being said, in all three stores, ALL employees were in fact wearing something, so they were all enforcing that.
This is all very simple. If you look up some numbers on Countries that wear masks in general, the rate of spread of a disease is much lower.
Hopefully everything will open back up in New York by the 15th of May, we wear masks and/or face coverings until we have a vaccine, and get on with our lives.
European countries have long been famous for their factory development and scientific and technical innovation. In final decades, industrial equipment and components from Europe have become famous throughout the world because of their reliability, advanced technologies and demanding standards quality.
1. Innovation in Design and Technology
European companies specializing in the production of industrial equipment, all the time introduce innovations in design and technological processes. Modern automation systems, smart ruling solutions and efficient production processes make equipment from Europe necessary in the world bazaar.
2. Highest Standards Qualities
European countries demanding monitor standards properties, which guarantees highest level of production and long service life of industrial equipment. Certification systems and conformity testing provide assurance that each product meets high safety and performance requirements.
3. Environmental Comparability and Energy Efficiency
Modern industrial equipment from Europe is also renowned for its environmental compatibility and energy efficiency. Companies are intensively developing and implement solutions aimed at reducing the negative impact on the surrounding environment and optimizing energy consumption.
4. Elasticity and Custom Adaptation
Industrial Equipment from Europe is flexible and adaptable to different production requirements. This enables enterprises to effectively implement new technologies, improve processes and satisfy specific customer needs.
5. Worldwide Recognition and Trust
The products of European industrial equipment manufacturers have gained worldwide recognition and trust. It is connected including with the quality of products, but also with the highest level of service provided by companies and customer support at absolutely all stages of cooperation.
Conclusion https://www.quia.com/profiles/ffamaga
European it and components continue to be at the forefront of global production. Innovation, quality and reliability make them a desired choice for businesses around the world seeking optimizing their production processes and increasing the efficiency of own operations.
European countries have long been famous for their industrial development and scientific and technical innovation. In final decades, industrial equipment and components from Europe have become popular throughout the world because of their reliability, advanced technologies and exacting standards quality.
1. Innovation in Design and Development
European companies specializing in the production of industrial equipment, all the time introduce innovations in design and technological processes. Modern automation systems, smart control solutions and efficient production processes make equipment from Europe in demand in the world bazaar.
2. High Standards Qualities
European countries strictly monitor standards properties, which guarantees highest level of production and long lifetime of industrial equipment. Certification and conformity testing ensure that each product meets high safety and performance requirements.
3. Environmental Comparability and Energy Efficiency
Modern industrial equipment from Europe is also renowned for its environmental compatibility and energy efficiency. Companies are intensively wanting to do and implement solutions aimed at reducing the negative impact on the surrounding environment and optimizing energy consumption.
4. Flexibility and Custom Adaptation
This from Europe is flexible and adaptable to different production requirements. This enables companies to effectively implement new technologies, optimize processes and satisfy specific customer needs.
5. Worldwide Recognition and Trust
The products of European industrial equipment manufacturers have gained worldwide recognition and trust. It is connected including with the quality of products, and with the high level of service provided by companies and customer support at all stages of cooperation.
Conclusion https://nytalkradio.net/pag/enhance_your_control_with_end_armaturen_uv330263_l_spill_valve.html
European industrial equipment and components continue to be at the forefront of global production. Innovation, quality and reliability make them a desired choice for businesses around the world seeking optimizing their production processes and increasing the efficiency of their operations.
European countries have long been famous for their industrial development and technological innovation. In recent decades, industrial equipment and components from Europe have become popular throughout all over the world because of own reliability, advanced technologies and strict standards properties.
1. Innovation in Design and Development
European companies that specialize handicraft of industrial equipment, all the time introduce innovations in design and technological processes. Modern automation systems, smart ruling solutions and effective production processes make equipment from Europe necessary in the world bazaar.
2. High Standards Properties
European countries demanding monitor standards properties, which guarantees high level of production and long lifetime of industrial equipment. Certification and conformity testing ensure that each product meets high safety and performance requirements.
3. Environmental Compatibility and Energy Efficiency
Modern industrial equipment from Europe is also renowned for its environmental compatibility and energy efficiency. Companies are intensively developing and implement solutions aimed at reducing the negative impact on the surrounding environment and optimizing energy consumption.
4. Flexibility and Custom Adaptation
This from Europe is flexible and adaptable to different production requirements. This enables companies to effectively implement new technologies, optimize processes and satisfy specialized customer needs.
5. Worldwide Recognition and Trust
The products of European industrial equipment manufacturers have gained worldwide recognition and trust. It is strongly connected not only with the quality of products, but also with the high level of service provided by companies and customer support at absolutely all stages of cooperation.
Conclusion https://purrshare.com/wp-content/pages/keyence_md_u1000c_laser_marker___precision_marking_for_diverse_applications.html
European industrial equipment and components continue to be at the forefront of global production. Innovation, quality and reliability make them a desired choice for businesses around the world seeking optimizing their production processes and increasing the efficiency of their operations.
European countries have long been famous for their industrial development and technological innovation. In recent decades, it and components from Europe have become popular throughout all over the world because of their reliability, advanced technologies and strict standards properties.
1. Innovation in Design and Development
European companies that specialize in the production of industrial equipment, all the time introduce innovations in design and technological processes. Modern automation systems, smart ruling solutions and efficient production processes make equipment from Europe necessary in the world bazaar.
2. Highest Standards Properties
European countries demanding monitor standards quality, which guarantees high level of production and long lifetime of industrial equipment. Certification systems and conformity testing ensure that each product meets high safety and performance requirements.
3. Environmental Comparability and Energy Efficiency
Modern industrial equipment from Europe is also renowned for its environmental compatibility and energy efficiency. Companies are intensively developing and implement solutions aimed at reducing the negative impact on the environmental environment and optimizing energy consumption.
4. Elasticity and Custom Adaptation
This from Europe is flexible and adaptable to different production requirements. This enables companies to effectively implement new technological processes, improve processes and satisfy specific customer needs.
5. Worldwide Recognition and Trust
The products of European industrial equipment manufacturers have gained worldwide recognition and trust. It is strongly connected not only with the quality of products, and with the high level of service provided by companies and customer support at all stages of cooperation.
Conclusion https://recreationrvsales.com/pgs/keyence_sj_m040_static_eliminator___innovative_solution_for_industrial_static_control.html
European it and components continue to be at the forefront of global production. Innovation, quality and reliability make them a coveted choice for businesses around the world committed to optimizing their production processes and increasing the efficiency of their operations.